Aluminum Heat Sinks

Aluminum Heat Sinks Manufacturer for Custom Industrial Cooling Solutions

 

ZP manufactures aluminum heat sinks for industrial equipment, power electronics, LED lighting, and power supplies. We support OEM projects with extruded, skived, die-cast, and fabricated heat sink designs, including application-specific dimensions and mounting features.

 

 
 
Aluminum Alloy & Surface Treatment

 

6063 Aluminum

Commonly used for extruded heat sink profiles because of its extrudability and suitability for complex cross-sectional shapes. It also provides good anodizing characteristics.

01

6061 Aluminum

Offers higher mechanical strength than 6063 in commonly used comparable tempers and is suitable for machined components requiring structural rigidity.

02

Anodizing

Provides a protective oxide layer and optional color finishes. Coating thickness and electrical insulation requirements should be considered when specifying treated surfaces.

03

Thermal Contact Surfaces

Areas requiring direct thermal contact may need controlled surface finish and flatness. Anodizing or other coatings on these interfaces should be specified according to the assembly and thermal requirements.

04

Drawing Requirements

Material grade, temper, finish type, coating thickness, color, and any areas that must remain uncoated should be identified in the approved drawing.

05

 

Custom Aluminum Heat Sink Manufacturing

 

Overall Dimensions

Custom length, width, height, and base thickness based on the required installation space and manufacturing process.

Fin Geometry

Fin height, thickness, spacing, orientation, and arrangement tailored to the selected manufacturing method.

Mounting Features

Mounting holes, threaded holes, slots, recesses, and fixing interfaces for integration with electronic components and equipment housings.

Secondary Machining

CNC milling, drilling, tapping, and cutting for mounting interfaces, machined bases, and other drawing-defined features.

 

Aluminum Comb Heatsink

 

Aluminum Heat Sink Manufacturing & Selection

Extruded Aluminum Heat Sinks
Fins and base formed as one continuous profile. Suitable for consistent cross-sections, customizable lengths, and volume production.


Skived Aluminum Heat Sinks
Thin fins cut directly from a solid aluminum base. Suitable for high fin density and narrow fin spacing.


Die-Cast Aluminum Heat Sinks
Molten aluminum formed in molds to create complex geometries with integrated mounting features.


Stamped and Fabricated Heat Sinks
Sheet-metal fins formed by stamping and assembled into heat sink structures. Suitable for formed fin designs and multi-part assemblies.


Key Factors for Process Selection

Thermal: Power dissipation and maximum allowable temperature.

Cooling: Natural or forced-air cooling, airflow, and ventilation space.

Mechanical: Dimensions, fin geometry, mounting interfaces, and tolerances.

Production: Material, surface finish, quantity, and delivery schedule.

For a quotation: Provide 2D drawings or 3D CAD files, technical requirements, and estimated order quantity.

 

Aluminum Heat Sinks by Application
 

 

Power Electronics

 

Thermal management for IGBT modules, inverters, and industrial drives, where power dissipation, thermal contact, and forced-air cooling conditions influence heat sink selection.

Industrial Equipment

 

Cooling for industrial controllers and automation systems, where enclosure space, operating temperatures, and installation orientation affect heat sink integration.

Power Supplies and Renewable Energy

Heat dissipation for switching power supplies and solar inverters, where airflow paths, heat-source distribution, and available space influence cooling performance.

LED Lighting and Communication

 

Thermal management for LED modules and communication equipment, where compact packaging, natural convection, and equipment layout are important design considerations.

 

Aluminum Heat Sink Manufacturing Capacity

ZP operates two production bases covering 50,000 m², integrating aluminum extrusion, CNC machining, and downstream metal fabrication.

 
 

Aluminum Extrusion

12 extrusion lines ranging from 600 to 10,000 tons, with an annual production capacity of 50,000 tons, support customized aluminum profiles for different heat sink sizes and cross-sectional designs.

 
 
 

CNC Machining

More than 30 CNC machines support milling, drilling, tapping, and precision machining of aluminum profiles and components.

 
 
 

Fabrication and Assembly

10 punching machines, 10 stretch forming machines, 8 welding machines, 1 laser cutting machine, 3 press brake machines, and 2 assembly lines support secondary processing and component assembly.

 

 

Product Inspection

 

1

Dimensional Inspection

Overall dimensions, fin geometry, mounting-hole locations, and other specified features are checked against drawing tolerances.

2

Flatness and Precision Measurement

Base flatness and critical mounting interfaces can be measured according to project requirements. CMM inspection is available for specified dimensional features.

3

Surface and Coating Inspection

Visual inspection covers specified surface appearance and finish requirements. Anodized coating thickness can be checked where required by the approved specification.

4

Production and Final Inspection

In-process and final inspections are performed according to the applicable inspection plan. Material certificates, dimensional reports, and other inspection records can be arranged when agreed before production.

 

 

FAQ

 

Q: Can Existing Extrusion Tooling Be Used for a New Project?

A: Yes, if the existing die is compatible with the new product design. ZP can review the die specifications and profile drawings to determine whether the tooling is suitable for reuse.

Q: Who Owns the Custom Extrusion Die After Production?

A: Tooling ownership, storage, maintenance responsibilities, and future reuse rights should be defined in the purchase agreement before die manufacturing begins. This helps avoid ownership disputes during long-term supply arrangements.

Q: Can Aluminum Heat Sink Orders Be Divided into Multiple Production Batches?

A: Yes, scheduled deliveries can be discussed for projects requiring phased inventory replenishment. Batch quantities, delivery dates, total order volume, and pricing terms should be agreed upon before production.

Q: What Is the Minimum Order Quantity for Custom Aluminum Heat Sinks?

A: MOQ depends on tooling investment, production setup, product design, and order economics. Prototype quantities and mass-production requirements should be evaluated separately when requesting a quotation.

Q: How Long Does It Take to Complete a Custom Aluminum Heat Sink Order?

A: Lead time depends on tooling availability, order quantity, production scheduling, and required finishing or assembly operations. Sample lead time and mass-production lead time should be confirmed separately in the quotation.

Q: Can Product Specifications Be Changed After Order Confirmation?

A: Yes, subject to technical and commercial review. Changes require an updated drawing or written specification approval. Any impact on tooling, production costs, and delivery schedules should be evaluated before implementation.

Q: Can ZP Provide Material Certificates and Inspection Reports with Shipments?

A: Material certificates and inspection reports can be arranged according to agreed order requirements. Buyers should specify the required documents, reporting format, and batch traceability requirements before production.

As one of the most experienced aluminum heat sinks manufacturers and suppliers in China, we also support customized service. We warmly welcome you to wholesale advanced aluminum heat sinks at competitive price from our factory. If you have any enquiry about free sample, please feel free to email us.

(0/10)

clearall