video

LED Down Light Heat Sink

LED Downlight Heat Sink is an aluminum heat dissipation component designed for LED downlight assemblies. This model features a radial fin structure and a central base for LED board mounting, with an outer diameter of 121 mm. It is designed for thermal management in LED downlight applications using COB or SMD modules.

  • Product Introduction

LED Downlight Heat Sink is an aluminum heat dissipation component designed for LED downlight assemblies. This model features a radial fin structure and a central base for LED board mounting, with an outer diameter of 121 mm. It is designed for thermal management in LED downlight applications using COB or SMD modules.

 

Technical Specifications of LED Down Light Heat Sink

 

Specification

Product Data

Product Name

LED Down Light Heat Sink

Product Type

Aluminum Radial Fin Heat Sink

Application

LED Downlights

LED Module Compatibility

COB / SMD

Material

Aluminum Alloy 6063-T5

Manufacturing Process

Aluminum Extrusion with CNC Machining

Outer Diameter

Φ121 mm

Fin Configuration

Radial Fin Structure

Mounting Interface

Central Through-Hole

Surface Finish

Black Anodizing

Base Thickness

Defined by Approved Product Drawing

Overall Height

Defined by Approved Product Drawing

Dimensional Tolerances

According to Approved Product Drawing

led down light heat sink series
led down light with heat sinks

 

Structural Features of the LED Downlight Heat Sink

Radial Fin Configuration

The heat sink uses vertically arranged radial fins with T-shaped or inverted L-shaped cross-sections. The spaces between adjacent fins form open passages around the central base.

Solid Central Base

The central base provides a mounting surface for the LED board. Its contact area forms the thermal interface between the LED module and the heat sink.

 

Central Through-Hole

A through-hole is located at the center of the heat sink base. Its final dimensions and functional requirements are defined by the luminaire assembly drawing.

Fin Root Geometry

The radial fins connect to the central base through defined root sections. Raised or recessed features at these junctions form part of the fin-to-base geometry.

LED down light heat sink specification 1
LED down light heat sink specification 2
LED down light heat sink specification 3

 

Product Dimensions and Customization

 

Overall Dimensions
The LED downlight heat sink features an outer diameter of 121 mm. Overall height, base thickness and other critical dimensions can be specified according to the approved product drawing.


Mounting Interface
The central base provides a mounting surface for the LED board. The central through-hole and other machined features can be customized according to customer requirements and engineering drawings.


Custom Dimensions
ZP GROUP supports custom manufacturing based on customer-provided 2D engineering drawings and 3D design files. Key dimensions, hole positions and machining requirements are reviewed and confirmed before production.

 

Thermal Design Considerations for LED Downlight Applications

led down light heat sink features 1

Thermal Load Requirements

The required heat dissipation capacity should be determined by the LED module's actual heat dissipation load, rather than its electrical input power alone. LED module specifications and operating conditions are key inputs for thermal design evaluation.

Operating Conditions

Thermal evaluation should consider the ambient temperature, luminaire enclosure, installation orientation and available airflow. These conditions affect heat transfer from the LED module through the heat sink to the surrounding environment.

led down light heat sink features 2
led down light heat sink features 3

Temperature Measurement

Temperature measurement should cover relevant points within the LED assembly, including the LED board contact area and specified temperature monitoring points. Test conditions and sensor positions should be defined before thermal testing.

Thermal Performance Validation

Thermal performance can be evaluated through temperature measurements under specified operating conditions. Measured temperatures and thermal resistance data, where available, can be compared with the LED module's operating temperature requirements.

led down light heat sink features 4

 

Critical Dimensions and Inspection Requirements

 

Overall Dimension Inspection
The outer diameter, overall height and base thickness should be checked against the approved product drawing. Acceptance limits should follow the specified dimensional tolerances.


Mounting Feature Inspection
The central through-hole and other machined features should be evaluated against the drawing specifications. Relevant inspection dimensions include hole diameter, hole position and thread specifications where applicable.


LED Contact Surface Inspection
The LED board contact surface should meet the specified flatness, dimensional accuracy and surface condition requirements. These characteristics are important for maintaining proper contact between the LED module and the heat sink.


Surface Finish Inspection
The black anodized surface should be evaluated according to the agreed finish specification. Relevant acceptance criteria include surface coverage, color consistency and visible surface defects.

 

Frequently Asked Questions

 

Q: Can the LED Downlight Heat Sink Be Customized?

A: Yes. Customization is available for product dimensions, fin structure, aluminum alloy and surface finish according to project requirements.

Q: Can You Manufacture LED Downlight Heat Sinks from Customer Drawings?

A: Yes. ZP GROUP supports custom manufacturing based on customer-provided 2D engineering drawings and 3D design files, subject to technical review.

Q: Can I Request a Sample Before Mass Production?

A: Yes. Samples can be arranged before mass production, with a typical sample lead time of 7–15 days.

Q: What Is the MOQ for Custom LED Downlight Heat Sinks?

A: The MOQ depends on the heat sink dimensions and design complexity. ZP GROUP confirms the applicable order quantity after reviewing the product specifications and project requirements.

Q: What Is the Production Lead Time for Custom Orders?

A: The typical mass production lead time is 25–35 days, depending on order quantity and production requirements.

Q: What Is the Supply Scope of the LED Downlight Heat Sink?

A: The product is an aluminum heat sink component designed for LED downlight assemblies. Requirements for LED modules, drivers and other luminaire components can be specified separately during quotation.

Q: Can You Arrange Repeat Orders Based on an Approved Sample?

A: Yes. Repeat orders can follow the approved product drawing, material specification and sample. Any specification changes are subject to customer approval before production.

Q: What Information Is Required to Request a Quotation?

A: Please provide a 2D drawing or 3D file, order quantity, material and surface finish requirements, LED module details and target delivery date. Annual demand estimates are also useful for production planning.

Hot Tags: led down light heat sink, China led down light heat sink manufacturers, suppliers, factory, Aquarium Light Heat Sink, LED heat sink, led heat sinks, round heat sink, Round Heat Sink Extrusion for LED Light, Square LED Module Heat Sink

Send Inquiry

You Might Also Like

(0/10)

clearall