Square LED Module Heat Sink
Square LED Module Heat Sink is an aluminum heat-dissipating component designed to support COB, SMD and mid-power LED modules. It is primarily used in street lights, tunnel lights, floodlights, garden lights and other LED outdoor lighting fixtures.
- Product Introduction
Square LED Module Heat Sink is an aluminum heat-dissipating component designed to support COB, SMD and mid-power LED modules. It is primarily used in street lights, tunnel lights, floodlights, garden lights and other LED outdoor lighting fixtures.
Product Specifications
|
Item |
Specification |
|
Product Name |
Square LED Module Heat Sink |
|
Product Type |
Aluminum LED Heat Sink |
|
Shape |
Square |
|
Material |
1050 / 6063 Aluminum Alloy |
|
Available Sizes |
100 × 100 mm / 120 × 120 mm / 146 × 146 mm |
|
Listed Application Power Range |
20 W / 30 W / 40 W / 50 W / 60 W |
|
Compatible LED Types |
COB / SMD / Mid-Power LED Arrays |
|
Manufacturing Process |
Aluminum Extrusion / CNC Machining |
|
Surface Treatment |
Anodizing |
|
Customization |
Dimensions, mounting features and profile configuration |

Mounting Interface for Square LED Modules
Square Base Dimensions
The square heat sink base provides a defined contact area for COB, SMD and mid-power LED modules. Available configurations include 100 × 100 mm, 120 × 120 mm and 146 × 146 mm.
LED Module Contact Surface
The base contact area corresponds to the LED module footprint and heat-source distribution. Its dimensions and surface geometry are important to the thermal contact between the LED module and aluminum heat sink.
Mounting Hole Layout
Mounting hole diameter, center distance and position are defined according to the corresponding product drawing. These dimensions determine the mechanical compatibility of the heat sink with the specified LED module assembly.




Thermal Performance of Square LED Heat Sink Configurations
Thermal Design Parameters
Base thickness, fin height, fin thickness and fin spacing determine the heat dissipation structure. Thermal performance is evaluated in relation to the LED module's heat load and the heat sink configuration.
Operating Conditions
Thermal evaluation considers LED input power, ambient temperature, heat-source distribution and airflow conditions. These parameters define the operating conditions for performance comparison.
Thermal Test Results
Thermal testing records the heat sink model, LED module, input power, ambient temperature and measured temperature. Thermal resistance can be calculated from the temperature difference and actual heat dissipation under the specified test conditions.
Dimensional Inspection of the LED Module Contact Surface
Base Flatness Inspection
The square base contact surface is inspected for flatness against the specified drawing requirements. Flatness is an important dimensional characteristic of the LED module contact area.
Mounting Hole Inspection
Hole diameter, center distance and positional accuracy are checked against the approved engineering drawing. Inspection focuses on dimensional conformity and consistency across machined features.
Profile Dimension Inspection
Overall dimensions, base thickness, fin height, fin thickness and fin spacing are inspected according to the product specification. Critical dimensions are evaluated against the specified tolerances.
Surface Condition Inspection
Extruded and machined surfaces are checked for scratches, burrs, deformation and other visible defects. Anodized surfaces are also evaluated against the specified finish requirements.
Custom Development for Square LED Module Heat Sinks
Material Selection
1050 and 6063 aluminum alloys are available for product development. Material selection is based on profile structure, thermal requirements and machining needs.
Surface Finish
Anodizing specifications can be customized by finish, color and film thickness. Surface treatment requirements are defined in the product specification.
Sample Development
ZP Aluminum follows a solution assessment, sampling, testing and optimization process. General reference lead times are 7–15 days for samples and 25–35 days for mass production, depending on tooling, product complexity and order quantity.
Manufacturing Capabilities
Manufacturing Facilities
ZP Aluminum operates two production bases covering approximately 50,000 m², with 12 aluminum extrusion lines (600T–10,000T) and more than 30 CNC machines.
Processing and Surface Treatment
Manufacturing capabilities include aluminum extrusion, CNC milling, drilling, profile cutting and in-house anodizing. Anodizing film thickness ranges from 5 to 25 μm, with specifications defined by project requirements.
Quality Certification
ZP Aluminum holds ISO 9001 certification. RoHS declarations and material compliance documents are available according to the supplied product and applicable requirements.
Technical Documentation
Engineering documents include product datasheets, 2D drawings, 3D STEP files and aluminum alloy specifications. Dimensional inspection and thermal test reports are available where generated for the relevant product configuration.
FAQ
Q: Can ZP Aluminum support mass production orders?
A: Yes. Mass production is arranged according to approved product drawings, order quantities, machining requirements and surface treatment specifications.
Q: How are square LED heat sinks packaged for export?
A: Packaging is designed to protect the aluminum base, machined surfaces and fins from scratches, deformation and transportation damage. Packaging methods are selected according to product dimensions and shipment requirements.
Q: What information is required for a production quotation?
A: Please provide the required product specifications, order quantity, surface treatment requirements and target delivery date. Technical drawings are recommended for accurate cost and production evaluation.
Q: Can ZP Aluminum support repeat orders?
A: Yes. Repeat production can follow the approved drawings, material specifications and surface treatment requirements. Annual demand forecasts can be used for production planning.
Q: Can this heat sink be used in an enclosed LED luminaire?
A: It may be suitable, subject to thermal validation. Provide the enclosure design, LED power and ambient temperature to evaluate performance under actual operating conditions.
Q: What thermal interface material should be used between the LED module and heat sink?
A: Use thermal grease or a thermal pad specified by the LED module manufacturer. Selection depends on the contact gap, surface condition and assembly design.
Q: Which LED temperature should be checked during thermal validation?
A: Check the LED module's specified case temperature (Tc). It must remain within the manufacturer's operating limits under actual application conditions.
Q: Can thermal resistance values from different heat sink suppliers be compared directly?
A: Only under comparable test conditions. Check ambient temperature, airflow, input power, heat-source configuration and measurement points before comparing results.
Hot Tags: square led module heat sink, China square led module heat sink manufacturers, suppliers, factory, Circular Led Light Heatsink, custom heat sink, extruded LED heatsinks, LED Ceiling Light Heat Sink, round heat sink, Round Heat Sink Extrusion for LED Light
You Might Also Like










